Bitcoin Nonce Explained - Mycryptopedia

Implementing Bitcoin's Proof of Work hashing mechanics based on a concept of Nonce using GoLang

submitted by EnchanterIOSvk to golang [link] [comments]

How about adjusting nonce length to force distribute hashing power? /r/Bitcoin

How about adjusting nonce length to force distribute hashing power? /Bitcoin submitted by ABitcoinAllBot to BitcoinAll [link] [comments]

Does Ethereum's Proof of Work operate in a similar way to Bitcoin's? Is there value generated that miners must hash block info with nonce values to try and achieve?

In order to "win" and get a block mined must the miner "guess the nonce" to generate the correct value?
I don't understand the Proof of work used by ethereum. I'd appreciate if anyone had an ELI5, or even ELI30-but-only-understand-bitcoin's-POW.
Thank you.
EDIT: Also, what is an uncle block, and why would (seemingly) stale/dead/orphaned blocks be included in a new "canonical" block?
submitted by murphy9191 to ethdev [link] [comments]

08-01 22:02 - 'Developers: Confirm Bitcoin Fork Easter Egg on BTC Fork Genesis block hash EC and 148 ! This is ViaBTC Joke when they created the Hash Nonce' (reddit.com) by /u/Sonicthoughts removed from /r/Bitcoin within 0-9min

Developers: Confirm Bitcoin Fork Easter Egg on BTC Fork Genesis block hash EC and 148 ! This is ViaBTC Joke when they created the Hash Nonce
Go1dfish undelete link
unreddit undelete link
Author: Sonicthoughts
submitted by removalbot to removalbot [link] [comments]

Transaction ID, nonce, Merkle root, what do all these hashed numbers mean? James with Bitcoin 101 gets into the nitty gritty of block headers.

Link to the YouTube video.
Also, sister thread at bitcoin.
submitted by LADogers to BitcoinBeginners [link] [comments]

Giving away Reddit golds to those who tell me a fact about btc i didn't know. (Being honest)

submitted by justinCrypto to Bitcoin [link] [comments]

Question about the logic behind bitcoin mining

I read this article where they explain that miners have to guess a number "that is less than or equal to the target hash". Then they show some examples with wrong guesses that are greater than the target.
Also this: "There is no minimum target, but there is a maximum target set by the Bitcoin Protocol. "
My question is if it can be less and still be acceptable why not just guess a very low number?
submitted by Gyahor to NoStupidQuestions [link] [comments]

When the bitcoin is mined, where does the information go?

When bitcoin is mined it uses hashing. Where then does the hashing go to and what is it used for?
submitted by Ae12_musk to Bitcoin [link] [comments]

Bob The Magic Custodian



Summary: Everyone knows that when you give your assets to someone else, they always keep them safe. If this is true for individuals, it is certainly true for businesses.
Custodians always tell the truth and manage funds properly. They won't have any interest in taking the assets as an exchange operator would. Auditors tell the truth and can't be misled. That's because organizations that are regulated are incapable of lying and don't make mistakes.

First, some background. Here is a summary of how custodians make us more secure:

Previously, we might give Alice our crypto assets to hold. There were risks:

But "no worries", Alice has a custodian named Bob. Bob is dressed in a nice suit. He knows some politicians. And he drives a Porsche. "So you have nothing to worry about!". And look at all the benefits we get:
See - all problems are solved! All we have to worry about now is:
It's pretty simple. Before we had to trust Alice. Now we only have to trust Alice, Bob, and all the ways in which they communicate. Just think of how much more secure we are!

"On top of that", Bob assures us, "we're using a special wallet structure". Bob shows Alice a diagram. "We've broken the balance up and store it in lots of smaller wallets. That way", he assures her, "a thief can't take it all at once". And he points to a historic case where a large sum was taken "because it was stored in a single wallet... how stupid".
"Very early on, we used to have all the crypto in one wallet", he said, "and then one Christmas a hacker came and took it all. We call him the Grinch. Now we individually wrap each crypto and stick it under a binary search tree. The Grinch has never been back since."

"As well", Bob continues, "even if someone were to get in, we've got insurance. It covers all thefts and even coercion, collusion, and misplaced keys - only subject to the policy terms and conditions." And with that, he pulls out a phone-book sized contract and slams it on the desk with a thud. "Yep", he continues, "we're paying top dollar for one of the best policies in the country!"
"Can I read it?' Alice asks. "Sure," Bob says, "just as soon as our legal team is done with it. They're almost through the first chapter." He pauses, then continues. "And can you believe that sales guy Mike? He has the same year Porsche as me. I mean, what are the odds?"

"Do you use multi-sig?", Alice asks. "Absolutely!" Bob replies. "All our engineers are fully trained in multi-sig. Whenever we want to set up a new wallet, we generate 2 separate keys in an air-gapped process and store them in this proprietary system here. Look, it even requires the biometric signature from one of our team members to initiate any withdrawal." He demonstrates by pressing his thumb into the display. "We use a third-party cloud validation API to match the thumbprint and authorize each withdrawal. The keys are also backed up daily to an off-site third-party."
"Wow that's really impressive," Alice says, "but what if we need access for a withdrawal outside of office hours?" "Well that's no issue", Bob says, "just send us an email, call, or text message and we always have someone on staff to help out. Just another part of our strong commitment to all our customers!"

"What about Proof of Reserve?", Alice asks. "Of course", Bob replies, "though rather than publish any blockchain addresses or signed transaction, for privacy we just do a SHA256 refactoring of the inverse hash modulus for each UTXO nonce and combine the smart contract coefficient consensus in our hyperledger lightning node. But it's really simple to use." He pushes a button and a large green checkmark appears on a screen. "See - the algorithm ran through and reserves are proven."
"Wow", Alice says, "you really know your stuff! And that is easy to use! What about fiat balances?" "Yeah, we have an auditor too", Bob replies, "Been using him for a long time so we have quite a strong relationship going! We have special books we give him every year and he's very efficient! Checks the fiat, crypto, and everything all at once!"

"We used to have a nice offline multi-sig setup we've been using without issue for the past 5 years, but I think we'll move all our funds over to your facility," Alice says. "Awesome", Bob replies, "Thanks so much! This is perfect timing too - my Porsche got a dent on it this morning. We have the paperwork right over here." "Great!", Alice replies.
And with that, Alice gets out her pen and Bob gets the contract. "Don't worry", he says, "you can take your crypto-assets back anytime you like - just subject to our cancellation policy. Our annual management fees are also super low and we don't adjust them often".

How many holes have to exist for your funds to get stolen?
Just one.

Why are we taking a powerful offline multi-sig setup, widely used globally in hundreds of different/lacking regulatory environments with 0 breaches to date, and circumventing it by a demonstrably weak third party layer? And paying a great expense to do so?
If you go through the list of breaches in the past 2 years to highly credible organizations, you go through the list of major corporate frauds (only the ones we know about), you go through the list of all the times platforms have lost funds, you go through the list of times and ways that people have lost their crypto from identity theft, hot wallet exploits, extortion, etc... and then you go through this custodian with a fine-tooth comb and truly believe they have value to add far beyond what you could, sticking your funds in a wallet (or set of wallets) they control exclusively is the absolute worst possible way to take advantage of that security.

The best way to add security for crypto-assets is to make a stronger multi-sig. With one custodian, what you are doing is giving them your cryptocurrency and hoping they're honest, competent, and flawlessly secure. It's no different than storing it on a really secure exchange. Maybe the insurance will cover you. Didn't work for Bitpay in 2015. Didn't work for Yapizon in 2017. Insurance has never paid a claim in the entire history of cryptocurrency. But maybe you'll get lucky. Maybe your exact scenario will buck the trend and be what they're willing to cover. After the large deductible and hopefully without a long and expensive court battle.

And you want to advertise this increase in risk, the lapse of judgement, an accident waiting to happen, as though it's some kind of benefit to customers ("Free institutional-grade storage for your digital assets.")? And then some people are writing to the OSC that custodians should be mandatory for all funds on every exchange platform? That this somehow will make Canadians as a whole more secure or better protected compared with standard air-gapped multi-sig? On what planet?

Most of the problems in Canada stemmed from one thing - a lack of transparency. If Canadians had known what a joke Quadriga was - it wouldn't have grown to lose $400m from hard-working Canadians from coast to coast to coast. And Gerald Cotten would be in jail, not wherever he is now (at best, rotting peacefully). EZ-BTC and mister Dave Smilie would have been a tiny little scam to his friends, not a multi-million dollar fraud. Einstein would have got their act together or been shut down BEFORE losing millions and millions more in people's funds generously donated to criminals. MapleChange wouldn't have even been a thing. And maybe we'd know a little more about CoinTradeNewNote - like how much was lost in there. Almost all of the major losses with cryptocurrency exchanges involve deception with unbacked funds.
So it's great to see transparency reports from BitBuy and ShakePay where someone independently verified the backing. The only thing we don't have is:
It's not complicated to validate cryptocurrency assets. They need to exist, they need to be spendable, and they need to cover the total balances. There are plenty of credible people and firms across the country that have the capacity to reasonably perform this validation. Having more frequent checks by different, independent, parties who publish transparent reports is far more valuable than an annual check by a single "more credible/official" party who does the exact same basic checks and may or may not publish anything. Here's an example set of requirements that could be mandated:
There are ways to structure audits such that neither crypto assets nor customer information are ever put at risk, and both can still be properly validated and publicly verifiable. There are also ways to structure audits such that they are completely reasonable for small platforms and don't inhibit innovation in any way. By making the process as reasonable as possible, we can completely eliminate any reason/excuse that an honest platform would have for not being audited. That is arguable far more important than any incremental improvement we might get from mandating "the best of the best" accountants. Right now we have nothing mandated and tons of Canadians using offshore exchanges with no oversight whatsoever.

Transparency does not prove crypto assets are safe. CoinTradeNewNote, Flexcoin ($600k), and Canadian Bitcoins ($100k) are examples where crypto-assets were breached from platforms in Canada. All of them were online wallets and used no multi-sig as far as any records show. This is consistent with what we see globally - air-gapped multi-sig wallets have an impeccable record, while other schemes tend to suffer breach after breach. We don't actually know how much CoinTrader lost because there was no visibility. Rather than publishing details of what happened, the co-founder of CoinTrader silently moved on to found another platform - the "most trusted way to buy and sell crypto" - a site that has no information whatsoever (that I could find) on the storage practices and a FAQ advising that “[t]rading cryptocurrency is completely safe” and that having your own wallet is “entirely up to you! You can certainly keep cryptocurrency, or fiat, or both, on the app.” Doesn't sound like much was learned here, which is really sad to see.
It's not that complicated or unreasonable to set up a proper hardware wallet. Multi-sig can be learned in a single course. Something the equivalent complexity of a driver's license test could prevent all the cold storage exploits we've seen to date - even globally. Platform operators have a key advantage in detecting and preventing fraud - they know their customers far better than any custodian ever would. The best job that custodians can do is to find high integrity individuals and train them to form even better wallet signatories. Rather than mandating that all platforms expose themselves to arbitrary third party risks, regulations should center around ensuring that all signatories are background-checked, properly trained, and using proper procedures. We also need to make sure that signatories are empowered with rights and responsibilities to reject and report fraud. They need to know that they can safely challenge and delay a transaction - even if it turns out they made a mistake. We need to have an environment where mistakes are brought to the surface and dealt with. Not one where firms and people feel the need to hide what happened. In addition to a knowledge-based test, an auditor can privately interview each signatory to make sure they're not in coercive situations, and we should make sure they can freely and anonymously report any issues without threat of retaliation.
A proper multi-sig has each signature held by a separate person and is governed by policies and mutual decisions instead of a hierarchy. It includes at least one redundant signature. For best results, 3of4, 3of5, 3of6, 4of5, 4of6, 4of7, 5of6, or 5of7.

History has demonstrated over and over again the risk of hot wallets even to highly credible organizations. Nonetheless, many platforms have hot wallets for convenience. While such losses are generally compensated by platforms without issue (for example Poloniex, Bitstamp, Bitfinex, Gatecoin, Coincheck, Bithumb, Zaif, CoinBene, Binance, Bitrue, Bitpoint, Upbit, VinDAX, and now KuCoin), the public tends to focus more on cases that didn't end well. Regardless of what systems are employed, there is always some level of risk. For that reason, most members of the public would prefer to see third party insurance.
Rather than trying to convince third party profit-seekers to provide comprehensive insurance and then relying on an expensive and slow legal system to enforce against whatever legal loopholes they manage to find each and every time something goes wrong, insurance could be run through multiple exchange operators and regulators, with the shared interest of having a reputable industry, keeping costs down, and taking care of Canadians. For example, a 4 of 7 multi-sig insurance fund held between 5 independent exchange operators and 2 regulatory bodies. All Canadian exchanges could pay premiums at a set rate based on their needed coverage, with a higher price paid for hot wallet coverage (anything not an air-gapped multi-sig cold wallet). Such a model would be much cheaper to manage, offer better coverage, and be much more reliable to payout when needed. The kind of coverage you could have under this model is unheard of. You could even create something like the CDIC to protect Canadians who get their trading accounts hacked if they can sufficiently prove the loss is legitimate. In cases of fraud, gross negligence, or insolvency, the fund can be used to pay affected users directly (utilizing the last transparent balance report in the worst case), something which private insurance would never touch. While it's recommended to have official policies for coverage, a model where members vote would fully cover edge cases. (Could be similar to the Supreme Court where justices vote based on case law.)
Such a model could fully protect all Canadians across all platforms. You can have a fiat coverage governed by legal agreements, and crypto-asset coverage governed by both multi-sig and legal agreements. It could be practical, affordable, and inclusive.

Now, we are at a crossroads. We can happily give up our freedom, our innovation, and our money. We can pay hefty expenses to auditors, lawyers, and regulators year after year (and make no mistake - this cost will grow to many millions or even billions as the industry grows - and it will be borne by all Canadians on every platform because platforms are not going to eat up these costs at a loss). We can make it nearly impossible for any new platform to enter the marketplace, forcing Canadians to use the same stagnant platforms year after year. We can centralize and consolidate the entire industry into 2 or 3 big players and have everyone else fail (possibly to heavy losses of users of those platforms). And when a flawed security model doesn't work and gets breached, we can make it even more complicated with even more people in suits making big money doing the job that blockchain was supposed to do in the first place. We can build a system which is so intertwined and dependent on big government, traditional finance, and central bankers that it's future depends entirely on that of the fiat system, of fractional banking, and of government bail-outs. If we choose this path, as history has shown us over and over again, we can not go back, save for revolution. Our children and grandchildren will still be paying the consequences of what we decided today.
Or, we can find solutions that work. We can maintain an open and innovative environment while making the adjustments we need to make to fully protect Canadian investors and cryptocurrency users, giving easy and affordable access to cryptocurrency for all Canadians on the platform of their choice, and creating an environment in which entrepreneurs and problem solvers can bring those solutions forward easily. None of the above precludes innovation in any way, or adds any unreasonable cost - and these three policies would demonstrably eliminate or resolve all 109 historic cases as studied here - that's every single case researched so far going back to 2011. It includes every loss that was studied so far not just in Canada but globally as well.
Unfortunately, finding answers is the least challenging part. Far more challenging is to get platform operators and regulators to agree on anything. My last post got no response whatsoever, and while the OSC has told me they're happy for industry feedback, I believe my opinion alone is fairly meaningless. This takes the whole community working together to solve. So please let me know your thoughts. Please take the time to upvote and share this with people. Please - let's get this solved and not leave it up to other people to do.

Facts/background/sources (skip if you like):



Thoughts?
submitted by azoundria2 to QuadrigaInitiative [link] [comments]

RESEARCH REPORT ABOUT ARYACOIN

RESEARCH REPORT ABOUT ARYACOIN
Author: Gamals Ahmed, CoinEx Business Ambassador

https://preview.redd.it/a7jv4azk86u51.jpg?width=1600&format=pjpg&auto=webp&s=e4a4dbb5afacd5747076beaa59e6343b805c3392

ABSTRACT

Aryacoin is a new cryptocurrency, which allows for decentralized, peer to peer transactions of electronic cash. It is like Bitcoin and Litecoin, but the trading of the coin occurs on sales platforms that have no restriction to use. Further, it was created with the goal of addressing the double spend issues of Bitcoin and does so using a timestamp server to verify transactions. It works by taking the hash of a block of items to be timestamped and widely publishing the hash. The timestamp proves that the data must have existed at the time in order to get the hash. Each timestamp then includes the previous timestamp in its hash, forming a chain.
The Aryacoin team is continuously developing new use cases for the coin, including exchanges where users can exchange the coins without any fees or restrictions, and offline options where the coins can be bought and sold for cash. The coins can also be used on the company’s other platform, mrdigicoin.io. Along with the coin, there is a digital wallet that can be created and controlled by the user entirely, with no control being retained by the Aryacoin team.

1.INTRODUCTION

The concept of Blockchain first came to fame in October 2008, as part of a proposal for Bitcoin, with the aim to create P2P money without banks. Bitcoin introduced a novel solution to the age-old human problem of trust. The underlying blockchain technology allows us to trust the outputs of the system without trusting any actor within it. People and institutions who do not know or trust each other, reside in different countries, are subject to different jurisdictions, and who have no legally binding agreements with each other, can now interact over the Internet without the need for trusted third parties like banks, Internet platforms, or other types of clearing institutions.
When bitcoin was launched it was revolutionary allowing people to transfer money to anytime and anywhere with very low transaction fees . It was decentralized and their is no third party involved in the transaction , only the sender and receiver were involved.
This paper provide a solution to the double-spending problem using a peer-to-peer distributed timestamp server to generate computational proof of the chronological order of transactions.The system is secure as long as honest nodes collectively control more CPU power than any cooperating group of attacker nodes. Bitcoin was made so that it would not be controlled or regulated but now exchanges and governments are regulating bitcoin and other cryptocurrencies at every step. Aryacoin was developed to overcome these restrictions on a free currency.
Aryacoin is a new age cryptocurrency, which withholds the original principle on which the concept of cryptocurrency was established. Combining the best in blockchain technology since the time of its creation, Aryacoin strives to deliver the highest trading and mining standards for its community.

1.1 OVERVIEW ABOUT ARYACOIN

Aryacoin is a new age cryptocurrency, which withholds the original principle on which the concept of cryptocurrency was established. Combining the best in blockchain technology since the time of its creation, Aryacoin strives to deliver the highest trading and mining standards for its community.
Aryacoin is a blockchain based project that allows users to access their wallet on the web and mobile browsers, using their login details.
Aryacoin can be mined; it also can be exchanged by other digital currencies in several world-famous exchanges such as Hitbtc, CoinEx, P2pb2b, WhiteBit, Changelly and is also listed in reputable wallets such as Coinomi and Guarda.
Aryacoin is a coin, which can be used by anyone looking to use cryptocurrency which allows them to keep their privacy even when buying/selling the coin along with while using the coin during transactions. Proof of work and cryptographic hashes allows transactions to verified.
Stable Fee Per AYA is a unique feature of Aryacoin, so by increasing the amount or volume of the transaction, there is no change in the fee within the network, which means that the fee for sending an amount less than 1 AYA is equal to several hundred million AYA. Another unique feature of Aryacoin is the undetectability of transactions in Explorer, such as the DASH and Monero, of course, this operation is unique to Aryacoin.
Using Aryacoin digital currency, like other currencies, international transactions can be done very quickly and there are no limitations in this area as the creators claim.
Aryacoin aims to allow users to access the Aryacoin wallet via the web and mobile browsers using their login details.
Aryacoin is a peer-to-peer electronic cash system that enables users to send and receive payments directly from one party to another, and allow them to transfer funds across borders with no restriction or third party involvement. The blockchain-based system embraces the digital signature, which prevents double spending and low transfer fees, which enables users to transfer huge amounts with very low fees. The proof-of-work consensus mechanism allows each transaction to be verified and confirmed, while anonymity enables users to use the coin anywhere at any time.
According to the website of the operation, each wallet is divided into 2 or more AYA wallet addresses for each transaction, and depending on the volume of the transaction block, the origin, and destination of transactions in the network can not be traced and displayed to the public.
In fact, each wallet in Aryacoin consists of a total of several wallets. The number of these wallets increases per transaction to increase both security and privacy. Aryacoin also uses the dPoW protocol. In the dPoW protocol, a second layer is added to the network to verify transactions, which makes “51% attack” impossible even with more than half of the network hash, and blocks whose Blockchain uses this second layer of security never run the risk of 51% attacks.
AYA has been listed on a number of crypto exchanges, unlike other main cryptocurrencies, it cannot be directly purchased with fiats money. However, You can still easily buy this coin by
first buying Bitcoin from any large exchanges and then transfer to the exchange that offers to trade this coin.

1.1.1 ARYACOIN HISTORY

Aryacoin (AYA) is a new cryptocurrency, which has been created by a group of Iranian developers, is an altcoin which allows for decentralised, peer to peer transactions of electronic cash without any fees whatsoever. Along with the coin, there is a digital wallet that can be created and managed by the user entirely, with no control being retained by the Aryacoin team.
Aryacoin’s founder, Kiumars Parsa, has been a fan of alternative currencies and particularly Bitcoin.
We see people from all around the world using Blockchain technology and the great benefits that came with it and it then that I decided to solve this puzzle for find a way of bringing the last missing piece to the jigsaw. The idea for Aryacoin was born.” Parsa said.
Parsa and his team of Iranian ex-pats not only persevered but expedited the project and just a year later, in the summer of 2019, the first version of Aryacoin was released. In 2020, Aryacoin is the first and only Iranian coin listed on CMC.
Parsa goes on to state that it is now the strength of the community that has invested in the coin that will ultimately drive its success, alongside its robust technology and appealing 0% network fees.
We have thousands of voices behind Aryacoin. People for the people make this coin. It is a massive shout out for democracy. This had made us base the whole team strategy on the benefits for both our users and our traders.
One key example is that the network fee on AYA Blockchain is 0%. Yes, absolutely nothing, which which differentiates us from other networks. What also differentiates us from other coins is that we have AYAPAY which is the first cryptocurrency Gateway in the world which does not save funds on third party storage with all funds being forwarded directly to any wallet address that the Gateway owner requests”.
So for the first time ever, and unlike other gateways, incoming funds will be saved on the users account with submitted withdrawal requests then made on the Gateway host website. In AYAPAY which has also been developed by the Aryacoin team, all funds without extra fees or extra costs will directly forwarded to users wallets. We have named this technology as CloudWithdrawal.
We are continuously challenging ourselves as it is a crowded marketplace. We are striving to have a safer Blockchain against 51% attacks, faster confirmations speeds of transactions, cheaper network fee, growing the market by cooperation with Top tier Exchangers.

1.1.2 ARYACOIN’S MAIN GOAL

Aryacoin’s main goal is to educate people and give them the freedom to use cryptocurrency in any way they want. Aryacoin empowers the users to transfer, pay, trade cryptocurrency from any country around the globe.
Platforms that have been created by Aryacoin Team, as well as those that will go live in future, operate on the same principle and exclude absolutely no one.

1.1.3 PROBLEM ARYACOIN SEEKS TO SOLVE

Aryacoin aims to provide a long-term solution to the problem of double spending, which is still common in the crypto market. The developers of the system have created a peer-to-peer distributed timestamp server that generates computational proof of the transactions as they occur.
Besides, the system remains secure provided honest nodes control more CPU power than any cooperating group of attacker nodes. While Bitcoin was designed not to be regulated or controlled, many exchanges and governments have put regulatory measures on the pioneer cryptocurrency at every step. Aryacoin aims to overcome these restrictions as a free digital currency.

1.1.4 BENEFITS OF USING ARYACOIN

Aryacoin solution offers the following benefits:
  • Real-time update: whether you’re going on a holiday or a business trip, no problem. You can access your coins all over the world.
  • Instant operations: Aryacoin makes it quite easy for you to use your digital wallet and perform various operations with it.
  • Safe and secure: all your data is stored encrypted and can only be decrypted with your private key, seed, or password.
  • Strong security: The system has no control over your wallet. You are 100% in charge of your wallet and funds.

1.1.5 ARYACOIN FEATURES

1. Anonymity
The coin provides decent level of anonymity for all its users. The users can send their transactions to any of the public nodes to be broadcasted , the transaction sent to the nodes should be signed by the private key of the sender address . This allows the users to use the coin anywhere any time , sending transactions directly to the node allows users from any place and country .
2. Real Life Usage
aryacoin’s team is continuously developing new and innovative ways to use the coins , they are currently developing exchanges where the users can exchange the coins without any fees and any restrictions . They also are currently developing other innovative technologies, which would allow users to spend our coins everywhere and anywhere.
3. Offline Exchanges
They are also working with different offline vendors which would enable them to buy and sell the coins directly to our users on a fixed/variable price this would allow easy buy/sell directly using cash . This would allow the coins to be accessible to users without any restrictions which most of the online exchanges have, also increase the value and number of users along with new ways to spend the coin. This would increase anonymity level of the
coin. In addition, introduce new users into the cryptomarket and technology. Creating a revolution, which educates people about crypto and introduce them to the crypto world, which introduces a completely new group of people into crypto and a move towards a Decentralized future!
4. Transactions
When it comes to transactions, Aryacoin embraces a chain of digital signatures, where each owner simply transfers the coin to the next person by digitally signing a hash of the previous transaction and the public key of the next owner. The recipient can then verify the signatures to confirm the chain of ownership. Importantly, Aryacoin comes with a trusted central authority that checks every transaction for double spending.
5. Business Partner with Simplex
Aryacoin is the first and only Iranian digital currency that managed to obtain a trading license in other countries.
In collaboration with the foundation and financial giant Simplex, a major cryptocurrency company that has large companies such as Binance, P2P, Changelly, etc. Aryacoin has been licensed to enter the world’s major exchanges, as well as the possibility of purchasing AYA through Credit Cards, which will begin in the second half of 2020.
Also, the possibility of purchasing Aryacoin through Visa and MasterCard credit cards will be activated simultaneously inside the Aryacoin site. plus, in less than a year, AYA will be placed next to big names such as CoinCapMarket, Coinomi, P2P, Coinpayments and many other world-class brands today.

1.1.6 WHY CHOOSE ARYACOIN?

If you want to use a cryptocurrency that allows you to keep your privacy online even when buying and selling the coins, the Aryacoin team claims that AYA is the way to go. Aryacoin is putting in the work: with more ways to buy and sell, and fixing the issues that were present in the original Bitcoin, plus pushing the boundaries with innovative solutions in cryptocurrencies. You can get started using Aryacoin (AYA) payments simply by having a CoinPayments account!

1.1.7 ARYANA CENTRALIZED EXCHANGE

Aryana, the first Iranian exchange is a unique platform with the following features:
  • The first real international Persian exchange that obtains international licenses and is listed in CoinMarketCap.
  • The first Iranian exchange that has been cooperating with a legal and European exchange for 3 years.
  • The possibility of trading in Tomans (available currency in Iran) at the user’s desired price and getting rid of the transaction prices imposed by domestic sites inside Iran.
  • There is an internal fee payment plan by Iranian domestic banks for depositing and withdrawing Tomans for Aryacoin holders in Aryana Exchange.
  • The number that you see on the monitor and in your account will be equal to the number that is transferred to your bank account without a difference of one Rial.
  • The last but not least, noting the fact that there is a trading in Tomans possibility in Aryana exchange.
Aryana Exchange is using the most powerful, fastest, and most expensive server in the world, Google Cloud Platform (GCP), which is currently the highest quality server for an Iranian site, so that professional traders do not lag behind the market even for a second.
The feature of Smart Trading Robots is one of the most powerful features for digital currency traders. Digital cryptocurrency traders are well aware of how much they will benefit from smart trading robots. In the Aryana exchange, it is possible to connect exchange user accounts to intelligent trading bots and trade even when they are offline.
The injection of $ 1 million a day in liquidity by the WhiteBite exchange to maintain and support the price of Tether and eliminate the Tether fluctuations with Bitcoin instabilities used by profiteers to become a matter of course.

1.1.8 HOW DOES ARYACOIN WORK?

Aryacoin (AYA) tries to ensure a high level of security and privacy. The team has made sure to eliminate any trading restrictions for the network users: no verification is required to carry out transactions on AYA, making the project truly anonymous, decentralized, and giving it a real use in day-to-day life. The Delayed-Proof-of-Work (dPoW) algorithm makes the Aryacoin blockchain immune to any attempts of a 51% attack. AYA defines a coin as a chain of digital signatures — each owner transfers the coin to the next owner by digitally signing the hash of the previous transaction and the public key of the next owner, and the receiver verifies the signatures and the chain of ownership.

2. ARYACOIN TECHNOLOGY

2.1 PROOF-OF-WORK

They use a proof-of-work system similar to Adam Back’s Hashcash to implement a distributed timestamp server on a peer-to-peer basis, rather than newspaper or Usenet publications. The proof-of-work involves scanning for a value that when hashed, such as with SHA-256, the hash begins with a number of zero bits. The average work required is exponential in the number of zero bits required and can be verified by executing a single hash.
For their timestamp network, they implement the proof-of-work by incrementing a nonce in the block until a value is found that gives the block’s hash the required zero bits. Once the CPU effort has been expended to make it satisfy the proof-of-work, the block cannot be changed without redoing the work. As later blocks are chained after it, the work to change the block would include redoing all the blocks after it.
The proof-of-work also solves the problem of determining representation in majority decision making. If the majority were based on one-IP-address-one-vote, it could be subverted by anyone able to allocate many IPs. Proof-of-work is essentially one-CPU-one-vote. The majority decision is represented by the longest chain, which has the greatest proof-of-work effort invested in it. If honest nodes control a majority of CPU power, the honest chain will grow the fastest and outpace any competing chains. To modify a past
block, an attacker would have to redo the proof-of-work of the block and all blocks after it, then catch up with, and surpass the work of the honest nodes.

2.2 NETWORK

The steps to run the network are as follows:
  • New transactions are broadcast to all nodes.
  • Each node collects new transactions into a block.
  • Each node works on finding a difficult proof-of-work for its block.
  • When a node finds a proof-of-work, it broadcasts the block to all nodes.
  • Nodes accept the block only if all transactions in it are valid and not already spent.
This is a very simple system that makes the network fast and scalable, while also providing a decent level of anonymity for all users. Users can send their transactions to any of the public nodes to be broadcast, and the private key of the sender’s address should sign any transaction sent to the nodes. This way, all transaction info remains strictly confidential. It also allows users to send transactions directly to the node from any place at any time and allows the transferring of huge amounts with very low fees.

2.3 AYAPAY PAYMENT SERVICES GATEWAY:

According to creators Aryacoin, the development team has succeeded in inventing a new blockchain technology for the first time in the world, which is undoubtedly a big step and great news for all digital currency enthusiasts around the world.
This new technology has been implemented on the Aryacoin AYAPAY platform and was unveiled on October 2. AYAPAY payment platform is the only payment gateway in the world that does not save money in users’ accounts and transfers incoming coins directly to any wallet address requested by the gateway owner without any additional transaction or fee.
In other similar systems or even systems such as PayPal, money is stored in the user account.

2.4 CONSENSUS ALGORITHM IN ARYACOIN

The devs introduced the Delayed-Proof-of-Work (dPoW) algorithm, which represents a hybrid consensus method that allows one blockchain to take advantage of the security provided by the hashing power of another blockchain. The AYA blockchain works on dPoW and can use such consensus methods as Proof-of-Work (PoW) or Proof-of-Stake (PoS) and join to any desired PoW blockchain. The main purpose of this is to allow the blockchain to continue operating without notary nodes on the basis of its original consensus method. In this situation, additional security will no longer be provided through the attached blockchain, but this is not a particularly significant problem. dPoW can improve the security level and reduce energy consumption for any blockchain.

2.5 DOUBLE-SPEND PROBLEM AND SOLUTION

One of the main problems in the blockchain world is that a receiver is unable to verify whether or not one of the senders did not double-spend. Aryacoin provides the solution, and has established a trusted central authority, or mint, that checks every transaction for double-spending. Only the mint can issue a new coin and all the coins issued directly from the mint are trusted and cannot be double-spent. However, such a system cannot therefore
be fully decentralized because it depends on the company running the mint, similar to a bank. Aryacoin implements a scheme where the receiver knows that the previous owners did not sign any earlier transactions. The mint is aware of all transactions including which of them arrived first. The developers used an interesting solution called the Timestamp Server, which works by taking a hash of a block of items to be ‘timestamped’ and publishing the hash. Each timestamp includes the previous timestamp in its hash, forming a chain. To modify a block, an attacker would have to redo the proof-of-work of all previous blocks, then catch up with, and surpass the work of the honest nodes. This is almost impossible, and makes the network processes more secure. The proof-of-work difficulty varies according to circumstances. Such an approach ensures reliability and high throughput.

3. ARYACOIN ROADMAP

April 2019: The launch of Aryacoin; AYA ICO, resulting in over 30BTC collected
December 2019: The launch of AYA Pay
April 2020: The successful Hamedan Hardfork, supported by all AYA exchanges, aimed at integrating the dPoW algorithm, improving the security of the AYA blockchain.
June 2020: Aryana Exchange goes live, opening more trading opportunities globally
July 2020: The enabling of our Coin Exchanger
November 2020: The implementation of Smart Contracts into the Aryacoin Ecosystem
Q1 2021: Alef B goes live (more details coming soon)

4. THE NUCYBER NETWORK COMMUNITY & SOCIAL

Website: https://aryacoin.io/
Explorer: https://explorer.aryacoin.io/
Github: https://github.com/Aryacoin/Aryacoin
Twitter: 1.1k followers https://twitter.com/AryacoinAYA
Reddit: 442 members https://github.com/nucypher
Instagram: 3.8k followers https://www.instagram.com/mrdigicoin/ Telegram: 5.9k subscribers https://t.me/AYA_Global

5. SUMMARY

Aryacoin (AYA) is a new age cryptocurrency that combines the best of the blockchain technology and strives to deliver high trading and mining standards, enabling users to make peer-to-peer decentralized transactions of electronic cash. Aryacoin is part of an ecosystem that includes payment gateway Ayapay and the Ayabank. AYA has a partnership with the Microsoft Azure cloud platform, which provides the ability to develop applications and store data on servers located in distributed data centers. The network fee for the AYA Blockchain is 0%. In Ayapay service, which has been developed by the Aryacoin team, all funds without extra fees or costs are directly forwarded to users’ wallets with technology called CloudWithdrawal. The devs team is introducing new use cases including exchanges where users will exchange AYA without any restrictions. You can buy AYA on an exchange of your choice, create an Aryacoin wallet, and store it in Guarda.

6. REFERENCES

1) https://coincodex.com/crypto/aryacoin/
2) https://www.icosandstos.com/coin/Aryacoin%20AYA/YuXO60UPF3
3) https://www.publish0x.com/iran-and-cryptocurrency/a-brief-introduction-of-aryacoin-first-ever-iranian-cryptocu-xoldlom
4) https://techround.co.uk/cryptocurrency/aryacoin-the-digital-currency-created-by-iranians/
5) https://bitcoinexchangeguide.com/aryacoin/
6) https://blog.coinpayments.net/coin-spotlight/aryacoin
7) https://guarda.com/aryacoin-wallet
submitted by CoinEx_Institution to Coinex [link] [comments]

What Is A Bitcoin Nonce [Simple]?

What Is A Bitcoin Nonce [Simple]? submitted by parakite to Bitcoin [link] [comments]

[HALVING MEGATHREAD] Block 630000 has been mined. Mining subsidy is now 6.25 BTC per block. The third Bitcoin Halving is now complete!

As of now, 630,000 blocks have been mined on the Bitcoin network, and the block reward has successfully halved for the second THIRD time. The previous block reward was 12.5 BTC, and the new block reward is now 6.25 BTC. Since the previous halving at Block 420000, monetary inflation decreased from 4.17%% to 3.57%. Block 630000 signals an immediate 50% reduction to 1.79%. The next halving will occur at Block 840000 in approximately four years. Godspeed, Bitcoin!
Here's Block 630000 in all its glory!
{ "hash": "000000000000000000024bead8df69990852c202db0e0097c1a12ea637d7e96d", "confirmations": "1", "strippedsize": "1186930", "weight": "3993250", "height": "630000", "version": "536870912", "merkleroot": "b191f5f973b9040e81c4f75f99c7e43c92010ba8654718e3dd1a4800851d300d", "tx": "3134", "time": "1589225023", "nonce": "2302182970", "bits": "387021369", "difficulty": "16104807485529", "previousblockhash": "0000000000000000000d656be18bb095db1b23bd797266b0ac3ba720b1962b1e", } 
coinbase transaction: 6.25 BTC + 0.90968084 BTC in fees
block size: 1186.93 KB
transactions: 3134
total bitcoins: 18,375,000
remaining bitcoins: ~2,625,000
previous halving: 3 years 10 months 2 days 2 hours 37 minutes 30 seconds ago
[Monetary Inflation Chart] [Controlled Supply] [Bitcoin Clock]
[blockstream.info] [insight.io] [tradeblock.com] [mempool.space] [btc.com] [blockchain.com]
submitted by BashCo to Bitcoin [link] [comments]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Proof of work algorithm

Proof of work algorithm
Although the Proof of Work algorithm gained popularity only in the last decade, due to the fact that it is one of the basic principles in the operation of the BTC network, it first appeared in the early 90s. At the time of its creation, its task was to provide protection against DoS attacks, loading the computer from which the requests originated with the need to carry out certain calculations to access the needed resource. This did not affect the basic processes in any way, but if a DoS attack was carried out from the PC, it exceedingly overloaded it.

EXBASE.IO
Almost 20 years later, Satoshi Nakamoto decided to apply it, when it became necessary to guarantee the reliability of the mined blocks of information before they become part of the blockchain. The concept has become so successful that it is used in almost every existing cryptocurrency, albeit with some changes.
In order to better understand the principle of operation of this algorithm, you need to look at BTC and the practice of its application in this particular cryptocurrency. As you know, the Blockchain network consists of many equivalent nodes that are looking for a solution to the equation for the selection of a pseudo-random nonce number, so that a new block can be added to the network (mining). The mentioned number, after passing through the hash function, together with the information that is directly in the block, should return the hash of the new block. And the task of other participants is to substitute it into a function in order to make sure that it is correct (validation). This is much faster and more efficient than if everyone was just looking for this number, even when one of the nodes already founded it. As a result, a new block is added by the node that first found a solution, and it receives a reward, provided that other nodes have verified the authenticity of the number.
However, a new block cannot be added if the nonce number was not found. Each new block stores information about the hash of the previous one, respectively, they are cryptographically linked. Taking into account the fact that for the appearance of a new block it is necessary to perform a large amount of work, the algorithm was called Proof of Work.
Although PoW has significant drawbacks - a large amount of computing power is required, therefore, a regular PC can't be used for it, and besides it, a huge amount of electricity is needed to power all equipment, the algorithm has proven its effectiveness. It is reliable, it copes with the task perfectly and doesn't have many successful analogues.
#ProofofWork #PoW
Website: https://exbase.io/ru/ Twitter: @exbase_io_ Facebook: https://www.facebook.com/exbase.io/ Telegram customer support: https://t.me/Exbaseofficial
submitted by ExBase_io to u/ExBase_io [link] [comments]

Recommendations needed

I want to learn about cryptocurrency, smart contracts and blockchain technology from a technical and a non technical point of view for educational purposes. Hence why I decided to come here. I'm fairly new to crypto and have no previous well-based knowledge in this field. Where should I start? What should I learn? What are some good sources and resources to help me learn about the technical aspects of cryptocurrency and how they are created/ mined/ distributed/ stored/ exchanged? What are they based on? Any help and recommendations will be appreciated Thank you in advance.
submitted by kwanwhite__ to CryptoCurrency [link] [comments]

Looking for Technical Information about Mining Pools

I'm doing research on how exactly bitcoins are mined, and I'm looking for detailed information about how mining pools work - i.e. what exactly is the pool server telling each participating miner to do.
It's so far my understanding that, when Bitcoins are mined, the following steps take place:
  1. Transactions from the mempool are selected for a new block; this may or may not be all the transactions in said mempool. A coinable transaction - which consists of the miner's wallet's address and other arbitrary data - that will help create new Bitcoin will also be added to the new block.
  2. All of said transactions are hashed together into a Merkle Root. The hashing algorithm is Double SHA-256.
  3. A block header is formed for the new block. Said block header consists of a Version, the Block Hash of the Previous Block in the Blockchain, said Merkle Root from earlier, a timestamp in UTC, the target, and a nonce - which is 32 bits long and can be any value from 0x00000000 to 0xFFFFFFFF (a total of 4,294,967,296 nonce values in total).
  4. The nonce value is set to 0x00000000, and said block header is double hashed to get the Block Hash of the current block; and if said Block Hash starts with a certain number of zeroes (depending on the difficulty), the miner sends the block to the Bitcoin Network, the block successfully added to the blockchain and the miner is awarded with newly created bitcoin.
  5. But if said Block Hash does not start with the required number of zeroes, said block will not be accepted by the network, and the miner Double Hashes the block again, but with a different nonce value; but if none of the 4,294,967,296 nonce values yields a Block Hash with the required number of zeroes, it will be impossible to add the block to the network - and in that case, the miner will either need to change the timestamp and try all 4,294,967,296 nonce values again, or the miner will need to start all over again and compose a new block with a different set of transactions (either a different coinable transaction, a different set of transactions from the mempool, or both).
Now, what I'm trying to figure out is what exactly each miner is doing differently in a mining pool, and if it is different depending on the pool.
One thing I've read is that a mining pool gives each participating miner a different set of transactions from the mempool.
I've also read that, because the most sophisticated miners can try all 4,294,967,296 nonce values in less than a fraction of a second, and since the timestamp can only be updated every second, the coinbase transaction is used as a "second nonce" (although, it is my understanding that, being part of a transaction, if this "extra nonce" is changed, all the transactions need to be double hashed into a new Merkle Root); and I may have read someplace that miners could also be given the same set of transactions from the mempool, but are each told to use a different set of "extra nonce" values for the coinbase transaction.
Is there anything else that pools tell miners to do differently? Is each pool different in the instructions it gives to the participating miners? Did I get anything wrong?
I want to make sure I have a full technical understanding of what mining pools are doing to mine bitcoin.
submitted by sparky77734 to Bitcoin [link] [comments]

Questions Regarding BTC Mining

I have been wondering about some of the details related to bitcoin mining bit couldn't find an answer, I would bet the answer can be found was I capable of looking up the mining algorithms but I'm not that savvy (not yet at least) so here it goes.
I understand that during mining, the miners take the hash calculated from a given block then appends a nonce to it and calculate SHA256 for the whole expression, if the hash value is larger than the limit set by mining difficulty, the miner must attempt again the SHA256 calculation again by appending a different nonce and repeat until a hash smaller than the limit is found.
What I wanted to ask is the following:
1) Is my understanding above correct? If not then please disregard the below questions since they would be garbage most likely (correcting the fault lines in my understanding would more than enough).
2) How are these nonces to be appended chosen? Are they chosen randomly at every attempt or changed sequentially by adding 1 for example?
3) Does the bitcoin blockchain enforces the use of a specific algorithm for generating nonces or is it left to the miners to concoct their own algorithms as they see fit? (If enforced by the bitcoin block chain, I'd appreciate an explanation why)
4) If the choice is left to miners to generate nonces as they see fit, what is the best approach to generating these nonces available?
5) In a mining pools where many ASICs are hashing together, is there any coordination at the pool or at least at individual ASIC miner level to ensure no two ASIC chips are calculating the hash for the same nonce while trying to find the block? If not, what are the difficulties preventing such an implementation?
Thanks in advance and if there are any useful resources addressing these questions please share them especially ones describing the mining algorithm generating nonces.
submitted by BitcoinAsks to BitcoinMining [link] [comments]

A Bitcoin Whale Just Moved a Stunning $1B in BTC

A Bitcoin Whale Just Moved a Stunning $1B in BTC submitted by Ichi_MokuM to CryptoMarkets [link] [comments]

What are the hashes that bitcoin mining resolves? Are they being used as decryption keys?

submitted by whyyyyyyysrsly to BitcoinBeginners [link] [comments]

An In-Depth Guide to: How do I Fix my Ledger Nano’s Stuck Ethereum Transaction?!?!?! (It’s Been Stuck for Weeks and NOTHING Traditional has Worked!!!!) As Well as: How Do I Choose My Nonce??? I’ve Tried MetaMask, MEW/MyEtherWallet, and Others, but Nothing is Working Correctly!!! I’m Dying by Stress!

So, if you were like me 1-2 months ago, you’ve probably already gone through 2,or 3, ...or 40 articles and guides that probably say something like:
“YeP, eVeRy EtHeReUm UsEr WiLl EvEnTuAlLy HaVe ThE LoW-gAs ExPeRiEnCe, YoU’rE nOt AlOnE! DoN’t FrEaK OuT tHoUgH; ThErE iS a WaY tO fIx It!”
Chances are, every time you read another useless article, you want to kill the nearest inanimate object, even though it was never alive in the first place. Nonetheless, you’re gonna kill it as much as it can be killed, holding nothing back; or, you’re just plotting to and slowly getting closer to executing the plan (and the object) every time you are insulted once again.
However, if you have the ability to download software (MyCryptoWallet) on a PC, it should be safe to relax now. I think you’ve finally found some good news, because I am 99.99...% sure this will work for the issue that so many people are having at this time, around the end of the month of May, year 2020.
More and more people are likely to be having this issue soon, since Ethereum's gas prices have been insanely high lately as well as having 300% price changes in a matter of minutes; Etherscan’s Gas tracker is nearly uselessly-inaccurate at this time. I've heard that there's a congestion attack; that was said a week ago, and it appears to be ongoing... (I can't think of any other suspect besides Justin Sun to blame it on... it must be incredibly expensive to overload the blockchain for this long... I may be wrong though...)
 
Let’s begin
For myself, I was trying to send an ERC20 token when this dreadful issue attacked. Specifically, the token was either BSOV or GRT; I sent them 1 after the other and the first succeeded, and the second one took over a week.
(They’re both great tokens in my opinion and deserve much more attention than they’ve been getting. BSOV is nearing its 1 year anniversary as I write this, and GRT is still in its 90 day community-development progress test, so of course I'm gonna take this opportunity to "shill" them; they are great tokens with great communities).
I was able to finally fix it, after a week of mental agony (also the txn finally processed 1-2 hours before I found the solution, robbing me of the gratitude of fixing it myself... (╯‵□′)╯︵┻━┻ ...but now I guess I can hopefully save some of you the headaches that I endured... ) I’m providing the ability to do the same, in a step by step guide.
Why did I go through all of this trouble? I'd fault the fact that I have ADHD and autism, which in my case can multiply each other’s intensity and cause me to “hyper-focus” on things, much much more than most with the same qualities, intentionally or not. Adderall is supposed to give me a bit of control over it, but except for in a very-generalized way, it’s still 90% up to chance and my default-capabilities to allow me control over my attention with self-willpower. But also Karma and Moons pls... ʘ‿ʘ
 
  1. In MyCrypto, (I'm using the Windows 10 app, version 1.7.10) you will open to a screen that says "How would you like to access your wallet?". Choose Ledger, of course. (Unless your here for some non-ledger issue? Idk why you would be but ok.)
  2. On the next screen (having your nano already plugged in, unlocked, and opened into the Ethereum app) click "Connect to Ledger Wallet"
  3. A screen overlay should appear, titled: "Select an Address". Here is where it may get confusing for some users. Refer to "AAA" below to know how to find your account. (Geez, sorry lol that was a huge amount of info for a reddit reply; I might've over-elaborated a little bit too much. but hey it's valuable information nonetheless!)
  4. After escaping the "AAA" section, you'll have accessed your account with MyCrypto. Awesome! To find your ERC20 tokens, (slight evil-laughter is heard from an unidentifiable origin somewhere in the back of your mind) go to "AAB".
  5. (You may have decided to find the token(s) on your own, rather than daring to submit to my help again; if so, you may pity those who chose the other path... ~~( ̄▽ ̄)~~) Now, once you've added your token, you should revert your attention to the account's transfer fill-out form!
  6. I'll combine the steps you probably understood on your own, already. Put in the address that your stuck transaction is still trying to send currency to. If an ERC20 token is involved, use the drop-down menu to change "ETH" to the token in trouble. Input your amount into the box labeled... wait for it... "Amount". Click on "+Advanced".
  7. Refer to Etherscan.com for the data you will need. Find the page for your "transaction(txn) hash/address" from the transaction history on the wallet/Ethereum-manager you used to send from. If that is unavailable, put your public address that your txn was sent from into the search tool and go to its info page; you should be able to find the pending txn there. Look to open the "more details" option to find the transaction's "Nonce" number.
  8. Put the nonce in the "Nonce" box on MyCrypto; you will contest the pending txn with a new txn that offers larger gas fees, by using the same nonce. If (but most likely "When") the new transaction is processed first, for being more miner-beneficial, the nonce will then be completed, and the old transaction will be dropped because it requests an invalid, now-outdated nonce. Your account will soon be usable!
  9. Go to the Gas Tracker, and it may or may not provide an informative reading. Choose whatever amount you think is best, but choose wisely; if you're too stingy it may get stuck again, and you'd need to pay another txn's gas to attempt another txn-fix.
  10. At the time I write this, I'd recommend 50-100 gwei; to repeat myself, gas requirements are insane right now. To be safe, make the gas limit a little higher than MCW's automatic calculation, you may need to undo the check-mark for "Automatically Calculate Gas Limit".
  11. Press "Send Transaction"!!!
  12. You will need to validate the action through your nano. It will have you validate three different things if you are moving an ERC20 Token. It's a good idea to verify accuracy, as always.
 
Well, I hope this worked for you! If not, you can let me know in a reply and I'll try to figure it out with you. I like making these in-depth educational posts, so if you appreciate it please let me know; I'll probably make more posts like this in the future!
( Surely this is at least far better than Ledger's "Support" article where they basically just tell you "Yeah, we haven't bothered to make a way to manually select nonces. I guess we might try to make that available for Bitcoin accounts at some point in the future; who knows? lol"... that's not infuriating at all, right?)
 
AAA:
Before I tell you how to find your address, I will first make it clear, within the italicized text, exactly which address you are looking for, if you are not already sure:
You may also skip the text written in italics if your issue does not include an ERC20 token, if you wish.
Ledger Live can confuse some users with its interface. On LL, to manage an ERC20 token, you first must go to your Ethereum account and add the token. When you then click on the added token under "Tokens" below the graph chart for your account's ETH amount over time, the screen will then open a new screen, that looks just the same, except focused on the specific ERC20 token. To confuse users further, there is then an option to "Star account", which then add the ETH icon with the ERC20 token's first letter or symbol overlapping, onto the easy access sidebar, as if it was another account of similar independency to the ETH account it was added to.
This improperly displays the two "accounts" relation to each other.
Your ERC20 holdings (at least for any and all ERC20 that I know of) are "held" in the exact-same address as the Ethereum address it was added to, which also "holds" any Ether you've added to it. You send both Ether (ETH) and any ERC20 Tokens to and from only Ethereum addresses of equivalent capabilities, in both qualities and quantities. In all basic terms and uses, they are the same.
So, to know what the problematic account's address is, find the address of the Ethereum account it was added to in Ledger Live.
Now, to find your address on MyCrypto, the most reliable way to find it, that I am aware of, is this:
Open Ledger Live. Go to the screen of your Ethereum address (again, this is the one that you added your ERC20 token, if applicable. If you're not dealing with an ERC20 token, you may ignore everything I've put in Italics). Click on "Edit account"; this is the icon next to the star that may look like a hex-wrench tool. On the new screen-overlay, you will see "> ADVANCED LOGS". Click on the ">" and it will point down while revealing a drop-down with some data that you may or may not recognize/understand. Likely to be found indented and in the middle-ish area, you will see this line, or something hopefully similar:
"freshAddressPath": "44'/60'/X'/0/0",
The "X" will probably be the only thing that changes, and the actual data will have a number in its place; it will not be a letter. Let's now put that line to use in MyCrypto:
Take the 44'/60'/X'/0/0 , and make sure you DO NOT copy the quotation marks, or that comma at the end either.
You can do this before or after copying and/or pasting, but drop the second "/0" at the end; it was not necessary in my case, I expect that you won't need it either, and will probably just make MyCrypto see it as an invalid input.
Okay, now go back to the "Select an Address" screen-overlay in MyCrypto.
Next to "Addresses", click on the box on the right, and you should be shown a list of options to select from in a drop-down menu.
Scroll all the way down, and you should find the "Custom" option at the very bottom. Select it.
A new box will appear; probably directly to the right of the now-shortened box that now displays the "Custom" option that you just selected. This box will offer an interface for typed input. ...yep... once again, believe it or not, you should click it.
Type " m/ ", no spaces before or after.
Type in or paste the data we retrieved from ledger live.
The box should now hold this:
m/44'/60'/X'/0
Again, X should be a number. In fact, that number is probably equal to the number of Ethereum (not including any ERC20 wannabe) accounts that you've made on Ledger Live before making the one we're working on right now! (1st Eth. Acc. would have: X = 0, 2nd: X = 1, 3rd: X = 2, ...)
Make sure you've included every apostrophe ( ' ), and solidus ( / ); there is NO APOSTROPHE for the "m" at the start and the "/0" at the end!
If you press the enter key or click on the check-mark to the right of where you typed, the appropriate addresses will be generated, and the address you created through Ledger Live should be the first one on the list!
Select your address and press "Unlock", and you are now accessing your account through the MyCrypto app's interface!
 
AAB:
In order to access your ERC20 token, you will need to add them first.
You may have to scroll down, but on the right-side of your unlocked account screen, you'll see a box with "Token Balances" as its header.
Click "Scan for tokens". This may take a short bit of time, and when it's done it may or may not display your ERC20 token. If it worked, you can head on back to the main part.
If you got the result I did, it won't display your token, or, if our result was exactly the same, it won't display any at all. However, you should now have the "Add Custom Token" option available, so see where that takes you.
You should discover four boxes, specified in order (Address/ Decimals / Token_Symbol / Balance). You may only need to fill in the "Address" box, but if you need to fill others, you'll find those with the token's address; here's 2 ways to find it, if you don't already know.
Method I:
Since you've probably already been managing your token with Ledger Live, you can go to the LL screen of your "account" for that token; Right next to the account's icon, and directly above the name, you'll see:
Contract: 0x??????...????????
Yes, go on; click it. You'll find the token's page on Etherscan; this was just a shortcut to the same place that both of the two previously referenced methods lead to. Skip to method... III?
Method II:
Go to Etherscan.com, or a similar Ethereum-blockchain-monitoring website, if you have a different preference. Search for the name of your token, and you should be able to see it as a search result. Activate your search manually of by selecting search option. Continue on with Method III.
Method III (Iⅈ what makes you think there was a third method? I said 2!):
At this point, you should find the "contract address" somewhere on the screen. This is the identity of the creature that breathes life into the token, allowing it to exist within the world of Ethereum. Steal it, and tell MyCrypto that you've left some of "your" tokens in the address of your ledger's Ethereum account. MyCrypto will trust and believe you without any concern or doubt, just by putting "your" contract address in the box for "Address"; it's almost too easy!
Well whaddya know, this one isn't actually too long! Don't tell anyone who may have taken a little longer whilst finding out how to do it themselves, though. There's value in trying to do something on your own, at least at first, so I'll let them think they made the right choice (¬‿¬). But take this star for humbling yourself enough to seek further help when you need it, since that is a very important life skill as well!
(o゜▽゜)o☆
Now, back to the useful stuff at the top...
 
EDIT: A comment below made me realize that this info should be added too. Here is my reply to the comment saying I could just use MetaMask. I said in the title that this guide is for questions where MEW and MetaMask aren’t working, but I guess it’s easy to miss. I used my u/caddark account to respond:
(Using this account because u/caddarkcrypto doesn’t meet the karma/age standards to comment; the post had to be manually approved.)
I guess I didn’t make it entirely clear; sorry:
The target audience for this guide is anyone with a stuck Ethereum transaction that was initiated through Ledger Live AND are experiencing the same difficulties I had encountered while trying to fix this issue for myself.
This wasn’t any regular stuck Ethereum transaction. Apparently before, there was an issue that made a Ledger Nano nearly impossible to connect to MetaMask (which is also Brave Browser’s integrated “crypto wallet” for the desktop version) and/or MEW (also perhaps any other browser wallets made for chrome and/or brave) that I heard was supposed to be fixed in a recent update. It might’ve been mostly patched, idk, but during my experience, (in which I was using the latest version of Ledger Live that is available right now,) that issue still remained.
The really weird part was that it successfully connected to the browser wallets again after I fixed the stuck transaction. At first I thought that somehow the txn was what was bugging the connection. However, later, during no txn issues, I was again unable to connect.
Seeing the same connection error again later, I opened up the MCW app I downloaded the day before, and was going to just use that. While in the process of operating MCW, I suddenly had another idea to try for the browser wallet so I went back to that just to quickly test it.
The browser wallet worked perfectly...
I don’t know how, but I think that somehow, something in MCW’s software, makes the browser wallets work. They don’t work for me without having MCW opened in the background first.
EDIT 2: Markdown decided to stop working after I did the first edit... I might fix it tomorrow... how did that happen though??? What did I do?
EDIT 3: nvm, I'm just fixing it now; I won't get much sleep tonight I guess.
submitted by CaddarkCrypto to CryptoCurrency [link] [comments]

How Bitcoin Mining Works

When you hear about bitcoin “mining,” you envisage coins being dug out of the ground. But bitcoin isn’t physical, so why do we call it mining?
Similar to gold mining, bitcoins exist in the protocol’s design just as the gold exists underground, but they haven’t been brought out into the light yet, just as the gold hasn’t yet been dug up.
The bitcoin protocol stipulates that a maximum of 21 million bitcoins will exist at some point. What miners do is bring them out into the light, a few at a time. Once miners finish mining all these coins, there won’t be more coins rolling out unless the bitcoin protocol changes to allow for a larger supply. Miners get paid in transaction fees for creating blocks of validated transactions and including them in the blockchain.
To understand how bitcoin mining works, let’s backtrack a little bit and talk about nodes. A node is a powerful computer that runs the bitcoin software and fully validates transactions and blocks. Since the bitcoin network is decentralized these nodes are collectively responsible for confirming pending transactions.
Anyone can run a node—you just download the free bitcoin software. The drawback is that it consumes energy and storage space – the network at time of writing takes hundreds of gigabytes of data. Nodes spread bitcoin transactions around the network. One node will send information to a few nodes that it knows, who will relay the information to nodes that they know, etc. That way, the pending transaction ends up getting around the whole network pretty quickly.
Some nodes are mining nodes,usually referred to as miners. These chunk outstanding transactions into blocks and add them to the blockchain. How do they do this? By solving a complex mathematical puzzle that is part of the bitcoin program, and including the answer in the block.
The puzzle that needs solving is to find a number that, when combined with the data in the block and passed through a hash function (which converts input data of any size into output data of a fixed length, produces a result that is within a certain range.
For trivia lovers, this number is called a “nonce”, which is an abbreviation of “number used once.” In the blockchain, the nonce is an integer between 0 and 4,294,967,296.
How do they find this number? By guessing at random. The hash function makes it impossible to predict what the output will be. So, miners guess the mystery number and apply the hash function to the combination of that guessed number and the data in the block. The resulting hash starts with a certain number of zeroes. There’s no way of knowing which number will work, because two consecutive integers will give wildly varying results. What’s more, there may be several nonces that produce the desired result, or there may be none. In that case, the miners keep trying but with a different block configuration.
The difficulty of the calculation (the required number of zeros at the beginning of the hash string) is adjusted frequently, so that it takes on average about 10 minutes to process a block.
Why 10 minutes? That is the amount of time that the bitcoin developers think is necessary for a steady and diminishing flow of new coins until the maximum number of 21 million is reached (expected some time in 2140).
The first miner to get a resulting hash within the desired range announces its victory to the rest of the network. All the other miners immediately stop work on that block and start trying to figure out the mystery number for the next one. As a reward for its work, the victorious miner gets some new bitcoin.
At the time of writing, the reward is 6.25 bitcoins per block, which is worth around $56,000 in June 2020.
However, it’s not nearly as cushy a deal as it sounds. There are a lot of mining nodes competing for that reward, and the more computing power you have and the more guessing calculations you can perform, the luckier you are.
Also, the costs of being a mining node are considerable, not only because of the powerful hardware needed, but also because of the large amounts of electricity consumed by these processors.
And, the number of bitcoins awarded as a reward for solving the puzzle will decrease. It’s 6.25 now, but it halves every four years or so (the next one is expected in 2024). The value of bitcoin relative to cost of electricity and hardware could go up over the next few years to partially compensate for this reduction, but it’s not certain.
If you’ve made it this far, then congratulations! There is still so much more to explain about the system, but at least now you have an idea of the broad outline of the genius of the programming and the concept. For the first time we have a system that allows for convenient digital transfers in a decentralized, trust-free and tamper-proof way.
submitted by hackatoshi to u/hackatoshi [link] [comments]

Bitcoin Maths

While reading through Princeton's Bitcoin book, I came across the ideas of hiding and puzzle friendliness. From how I understood it:
Hiding means that given the solution to hash function H(x|n), with random hash x and nonce n, there is a very large set of potential values that could be x, meaning it is infeasible to try to guess it, or at least would take an unreasonable amount of time.
Puzzle friendliness means that given H(x|n), there are multiple solutions that could be correct, but you would only be able to know if you verified the commitment.
Is my understanding of this correct? If so, doesn't puzzle friendliness mean that it's not collision resistant? I know that for the purposes of cryptocurrency, it's (a) impossible to make it truly collision resistant, and (b) we only care that it's not possible to find a commitment (but it can still exist). But doesn't that still violate the rule of collision resistance?
submitted by Econstudent0467 to math [link] [comments]

What is Hashing on the Blockchain? - YouTube I lived on bitcoin for 24 hours - YouTube Nonce – Definition, Meaning, Review, Description, Example, Proof-Of-Work Bitcoin Power Hashing Mining of ADCN Telugu 2 Bitcoin - Block Hash Nonce - YouTube

Bitcoin stores the nonce in the extraNonce field which is part of the coinbase transaction, which is stored as the left most leaf node in the merkle tree (the coinbase is the special first transaction in the block). The counter parameter is small at 32-bits so each time it wraps the extraNonce field must be incremented (or otherwise changed) to avoid repeating work. The basics of the hashcash ... Bitcoin Nonce Explained. A Bitcoin nonce is an arbitrary number that is used in Bitcoin’s proof of work consensus algorithm. The nonce can be found as a 4-byte field in a block header, and sees its value adjusted by miners so that the hash of the block will be less than or equal to the current target hash value set by the network. Bitcoin miners commonly make use of two nonce fields: The Nonce field which is included in the block header ; The extraNonce field which is part of the Coinbase transaction; Each field includes a counter parameter that is relatively small (32-bits). The hash function cycles through all values of the Nonce field, testing each outcome of the hash function against the difficulty setting, then ... Nonce is a 32 bit arbitrary random number that is typically used once. In Bitcoin's mining process, the goal is to find a hash below a target number which is calculated based on the difficulty. Proof of work in Bitcoin's mining takes an input consists of Merkle Root, timestamp, previous block hash and few other things plus a nonce which is completely random number. For Bitcoin Nonce example, proof of work, using hash functions, was considered as a means to combat email spam by forcing email senders to find a hash value for the email (which included a timestamp to prevent pre-computation of useful hashes for later use) that had an arbitrary number of leading zeroes, by hashing the same input with a large number of nonce values until a "desirable" hash was ...

[index] [3244] [38174] [9454] [9540] [33766] [33997] [27891] [28154] [1812] [31076]

What is Hashing on the Blockchain? - YouTube

Co to vlastně hash a nonce jsou a jakým způsobem se k těmto hodnotám dostaneme? V dnešním videu pokračujeme ve vzdělávání o těžbě kryptoměn a podíváme se prá... Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube. A brief and simple introduction to the hash function and how blockchain solutions use it for proof of work (mining) and data integrity (Merkle Trees). AsiaDigiCoin is going to provide an opportunity once in a lifetime, revolutionizing the business world of todays digital economy through Power Hashing!. Admin FB : https://www.facebook.com ... Bitcoin nonce example: The "nonce" in a bitcoin block is a 32-bit (4-byte) field whose value is set so that the hash of the block will contain a run of leading zeros. The rest of the fields may ...

#